terça-feira, 28 de maio de 2013

Primeiro projeto com o meu Arduino Severino

Bem já comecei a fazer alguns projetos com o meu Arduino. um bem simples e legal foi o do LCD 16x2 . como já tinha um display desses ficou mas fácil de fazer. O esquema usado para o projeto é este.
no caso o esquema usa um Arduino UNO. mas não muda nada em relação ao Severino pois as portas e as pinagens são as mesmas.
no meu caso fiz uma plaquinha par facilitar o meu trabalho como na foto embaixo.
Uma vantagem muito  boa pois o display LCD 16x2 sua alimentação é de 5v ai ficou mais fácil para mim.
o Código é este:

/*
  LiquidCrystal Library - Hello World

 Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
 library works with all LCD displays that are compatible with the
 Hitachi HD44780 driver. There are many of them out there, and you
 can usually tell them by the 16-pin interface.

 This sketch prints "Hello World!" to the LCD
 and shows the time.

  The circuit:
 * LCD RS pin to digital pin 12
 * LCD Enable pin to digital pin 11
 * LCD D4 pin to digital pin 5
 * LCD D5 pin to digital pin 4
 * LCD D6 pin to digital pin 3
 * LCD D7 pin to digital pin 2
 * LCD R/W pin to ground
 * 10K resistor:
 * ends to +5V and ground
 * wiper to LCD VO pin (pin 3)

 Library originally added 18 Apr 2008
 by David A. Mellis
 library modified 5 Jul 2009
 by Limor Fried (http://www.ladyada.net)
 example added 9 Jul 2009
 by Tom Igoe
 modified 22 Nov 2010
 by Tom Igoe

 This example code is in the public domain.

 http://www.arduino.cc/en/Tutorial/LiquidCrystal
 */


// include the library code:
#include <LiquidCrystal.h>

// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);

void setup() {
  // set up the LCD's number of columns and rows: 
  lcd.begin(16, 2);
  // Print a message to the LCD.
  lcd.print("hello, world!");
}

void loop() {
  // set the cursor to column 0, line 1
  // (note: line 1 is the second row, since counting begins with 0):
  lcd.setCursor(0, 1);
  // print the number of seconds since reset:
  lcd.print(millis()/1000);
}



no meu caso coloquei no lugar de "hello word!" coloquei "Makson & Hildete" por motivos óbvios como na foto abaixo. uma coisa importante é que não consegui programar o meu Arduino pelo windows 7 (não sei porque),  tive que instalar no meu pc o Ubuntu e rodando o arduino como SU" programou de primeira.
Espero que tenham gostado, estou esperando chegar meu censor de umidade e temperatura ai vou fazer um post com a utilização dele no Arduino.  Fiquem com Deus..

Nenhum comentário: